What Is Absolute Pressure?
Total pressure measured from zero.
Total pressure measured from zero.
What Is Absolute Temperature?
See Temperature, Absolute.
See Temperature, Absolute.
What Is Absorption?
The chemical process by which a hygroscopic desiccant, having a high affinity with water, melts and becomes a liquid by absorbing the condensed moisture.
The chemical process by which a hygroscopic desiccant, having a high affinity with water, melts and becomes a liquid by absorbing the condensed moisture.
What Is Actual Capacity?
Quantity of gas actually compressed and delivered to the discharge system at rated speed and under rated conditions. Also called Free Air Delivered (FAD).
Quantity of gas actually compressed and delivered to the discharge system at rated speed and under rated conditions. Also called Free Air Delivered (FAD).
What Is Adiabatic Compression?
See Compression, Adiabatic.
See Compression, Adiabatic.
What Is Adsorption?
The process by which a desiccant with a highly porous surface attracts and removes the moisture from compressed air. The desiccant is capable of being regenerated.
The process by which a desiccant with a highly porous surface attracts and removes the moisture from compressed air. The desiccant is capable of being regenerated.
What Is An Air Receiver?
See Receiver.
See Receiver.
What Are Air Bearings?
See Gas Bearings.
See Gas Bearings.
What Is An Aftercooler?
A heat exchanger used for cooling air discharged from a compressor. Resulting condensate may be removed by a moisture separator following the aftercooler.
A heat exchanger used for cooling air discharged from a compressor. Resulting condensate may be removed by a moisture separator following the aftercooler.
What Is Atmospheric Pressure?
The measured ambient pressure for a specific location and altitude.
The measured ambient pressure for a specific location and altitude.
What Is An Automatic Sequencer?
A device which operates compressors in sequence according to a programmed schedule.
A device which operates compressors in sequence according to a programmed schedule.
What Is Brake Horsepower(bhp)?
See Horsepower, Brake.
See Horsepower, Brake.
What Is Capacity?
The amount of air flow delivered under specific conditions, usually expressed in cubic feet per minute (cfm).
The amount of air flow delivered under specific conditions, usually expressed in cubic feet per minute (cfm).
What Is Capacity, Actual
The actual volume flow rate of air or gas compressed and delivered from a compressor running at its rated operating conditions of speed, pressures, and temperatures. Actual capacity is generally expressed in actual cubic feet per minute (acfm) at conditions prevailing at the compressor inlet.
The actual volume flow rate of air or gas compressed and delivered from a compressor running at its rated operating conditions of speed, pressures, and temperatures. Actual capacity is generally expressed in actual cubic feet per minute (acfm) at conditions prevailing at the compressor inlet.
What Is A Capacity Gauge?
A gauge that measures air flow as a percentage of capacity, used in rotary screw compressors
A gauge that measures air flow as a percentage of capacity, used in rotary screw compressors
What Is A Check Valve?
A valve which permits flow in only one direction.
A valve which permits flow in only one direction.
What Is Clearance?
The maximum cylinder volume on the working side of the piston minus the displacement volume per stroke. Normally it is expressed as a percentage of the displacement volume.
The maximum cylinder volume on the working side of the piston minus the displacement volume per stroke. Normally it is expressed as a percentage of the displacement volume.
What Is A Clearance Pocket?
An auxiliary volume that may be opened to the clearance space, to increase the clearance, usually temporarily, to reduce the volumetric efficiency of a reciprocating compressor.
An auxiliary volume that may be opened to the clearance space, to increase the clearance, usually temporarily, to reduce the volumetric efficiency of a reciprocating compressor.
What Is Compressibility?
A factor expressing the deviation of a gas from the laws of thermodynamics. (See also Supercompressibility)
A factor expressing the deviation of a gas from the laws of thermodynamics. (See also Supercompressibility)
What Is Compression, Adiabatic?
Compression in which no heat is transferred to or from the gas during the compression process.
Compression in which no heat is transferred to or from the gas during the compression process.
What Is Compression, Isothermal?
Compression is which the temperature of the gas remains constant.
Compression is which the temperature of the gas remains constant.
What Is Compression, Polytropic?
Compression in which the relationship between the pressure and the volume is expressed by the equation PVn is a constant.
Compression in which the relationship between the pressure and the volume is expressed by the equation PVn is a constant.
What Is Compression Ratio?
The ratio of the absolute discharge pressure to the absolute inlet pressure.
The ratio of the absolute discharge pressure to the absolute inlet pressure.
What Is Constant Speed Control?
A system in which the compressor is run continuously and matches air supply to air demand by varying compressor load.
A system in which the compressor is run continuously and matches air supply to air demand by varying compressor load.
What Is Critical Pressure?
The limiting value of saturation pressure as the saturation temperature approaches the critical temperature.
The limiting value of saturation pressure as the saturation temperature approaches the critical temperature.
What Is Critical Temperature?
The highest temperature at which well-defined liquid and vapor states exist. Sometimes it is defined as the highest temperature at which it is possible to liquify a gas by pressure alone.
The highest temperature at which well-defined liquid and vapor states exist. Sometimes it is defined as the highest temperature at which it is possible to liquify a gas by pressure alone.
What Is Cubic Feet Per Minute (cfm)?
Volumetric air flow rate.
Volumetric air flow rate.
What Is cfm, free Air?
cfm of air delivered to a certain point at a certain condition, converted back to ambient conditions.
cfm of air delivered to a certain point at a certain condition, converted back to ambient conditions.
What Is Actual cfm (acfm)?
Flow rate of air at a certain point at a certain condition at that point.
Flow rate of air at a certain point at a certain condition at that point.
What Is Inlet cfm (icfm)?
Cfm flowing through the compressor inlet filter or inlet valve under rated conditions.
Cfm flowing through the compressor inlet filter or inlet valve under rated conditions.
What Is Standard cfm?
Flow of free air measured and converted to a standard set of reference conditions (14.5 psia, 68°F, and 0% relative humidity).
Flow of free air measured and converted to a standard set of reference conditions (14.5 psia, 68°F, and 0% relative humidity).
What Is Cut-In/Cut-Out Pressure?
Respectively, the minimum and maximum discharge pressures at which the compressor will switch from unload to load operation (cut in) or from load to unload (cut out).
Respectively, the minimum and maximum discharge pressures at which the compressor will switch from unload to load operation (cut in) or from load to unload (cut out).
What Is A Cycle?
The series of steps that a compressor with unloading performs; 1) fully loaded, 2) modulating (for compressors with modulating control), 3) unloaded, 4) idle.
The series of steps that a compressor with unloading performs; 1) fully loaded, 2) modulating (for compressors with modulating control), 3) unloaded, 4) idle.
What Is Cycle Time?
Amount of time for a compressor to complete one cycle.
Amount of time for a compressor to complete one cycle.
What Is Degree of Intercooling?
The difference in air or gas temperature between the outlet of the intercooler and the inlet of the compressor.
The difference in air or gas temperature between the outlet of the intercooler and the inlet of the compressor.
What Is Deliquescent?
Melting and becoming a liquid by absorbing moisture.
Melting and becoming a liquid by absorbing moisture.
What Is Desiccant?
A material having a large proportion of surface pores, capable of attracting and removing water vapor from the air.
A material having a large proportion of surface pores, capable of attracting and removing water vapor from the air.
What Is Dew Point?
The temperature at which moisture in the air will begin to condense if the air is cooled at constant pressure. At this point the relative humidity is 100%
The temperature at which moisture in the air will begin to condense if the air is cooled at constant pressure. At this point the relative humidity is 100%
What Is Demand?
Flow of air at specific conditions required at a point or by the overall facility.
Flow of air at specific conditions required at a point or by the overall facility.
What Is A Diaphragm?
A stationary element between the stages of a multi-stage centrifugal compressor. It may include guide vanes for directing the flowing medium to the impeller of the succeeding stage. In conjunction with an adjacent diaphragm, it forms the diffuser surrounding the impeller.
A stationary element between the stages of a multi-stage centrifugal compressor. It may include guide vanes for directing the flowing medium to the impeller of the succeeding stage. In conjunction with an adjacent diaphragm, it forms the diffuser surrounding the impeller.
What Is Diaphragm cooling?
A method of removing heat from the flowing medium by circulation of a coolant in passages built into the diaphragm.
A method of removing heat from the flowing medium by circulation of a coolant in passages built into the diaphragm.
What Is A Diffuser?
A stationary passage surrounding an impeller, in which velocity pressure imparted to the flowing medium by the impeller is converted into static pressure
A stationary passage surrounding an impeller, in which velocity pressure imparted to the flowing medium by the impeller is converted into static pressure
What Are Digital Controls?
See Logic Controls.
See Logic Controls.
What Is Discharge Pressure?
Air pressure produced at a particular point in the system under specific conditions.
Air pressure produced at a particular point in the system under specific conditions.
What Is Discharge Temperature?
The temperature at the discharge flange of the compressor.
The temperature at the discharge flange of the compressor.
What Is Displacement?
The volume swept out by the piston or rotor(s) per unit of time, normally expressed in cubic feet per minute.
The volume swept out by the piston or rotor(s) per unit of time, normally expressed in cubic feet per minute.
What Is Droop?
The drop in pressure at the outlet of a pressure regulator, when a demand for air occurs.
The drop in pressure at the outlet of a pressure regulator, when a demand for air occurs.
What Are Dynamic Type Compressors?
Compressors in which air or gas is compressed by the mechanical action of rotating impellers imparting velocity and pressure to a continuously flowing medium. (Can be centrifugal or axial design)
Compressors in which air or gas is compressed by the mechanical action of rotating impellers imparting velocity and pressure to a continuously flowing medium. (Can be centrifugal or axial design)
What Is Efficiency?
Any reference to efficiency must be accompanied by a qualifying statement which identifies the efficiency under consideration, as in the following definitions of efficiency:
Any reference to efficiency must be accompanied by a qualifying statement which identifies the efficiency under consideration, as in the following definitions of efficiency:
What Is Efficiency, Compression?
Ratio of theoretical power to power actually imparted to the air or gas delivered by the compressor.
Ratio of theoretical power to power actually imparted to the air or gas delivered by the compressor.
What Is Efficiency, Isothermal?
Ratio of the theoretical work (as calculated on a isothermal basis) to the actual work transferred to a gas during compression.
Ratio of the theoretical work (as calculated on a isothermal basis) to the actual work transferred to a gas during compression.
What Is Efficiency, Mechanical?
Ratio of power imparted to the air or gas to brake horsepower (bhp).
Ratio of power imparted to the air or gas to brake horsepower (bhp).
What Is Efficiency, Polytropic?
Ratio of the polytropic compression energy transferred to the gas, to the actual energy transferred to the gas.
Ratio of the polytropic compression energy transferred to the gas, to the actual energy transferred to the gas.
What Is Efficiency, Volumetric?
Ratio of actual capacity to piston displacement.
Ratio of actual capacity to piston displacement.
What Is An Exhauster?
A term sometimes applied to a compressor in which the inlet pressure is less than atmospheric pressure.
A term sometimes applied to a compressor in which the inlet pressure is less than atmospheric pressure.
What Are Expanders?
Turbines or engines in which a gas expands, doing work, and undergoing a drop in temperature. Use of the term usually implies that the drop in temperature is the principle objective. The orifice in a refrigeration system also performs this function, but the expander performs it more nearly isentropically, and thus is more effective in cryogenic systems.
Turbines or engines in which a gas expands, doing work, and undergoing a drop in temperature. Use of the term usually implies that the drop in temperature is the principle objective. The orifice in a refrigeration system also performs this function, but the expander performs it more nearly isentropically, and thus is more effective in cryogenic systems.
What Are Filters?
Devices for separating and removing particulate matter, moisture or entrained lubricant from air.
Devices for separating and removing particulate matter, moisture or entrained lubricant from air.
What Is Flange connection?
The means of connecting a compressor inlet or discharge connection to piping by means of bolted rims (flanges).
The means of connecting a compressor inlet or discharge connection to piping by means of bolted rims (flanges).
What Is Fluidics?
The general subject of instruments and controls dependent upon low rate of flow of air or gas at low pressure as the operating medium. These usually have no moving parts.
The general subject of instruments and controls dependent upon low rate of flow of air or gas at low pressure as the operating medium. These usually have no moving parts.
What Is Free Air?
Air at atmospheric conditions at any specified location, unaffected by the compressor.
Air at atmospheric conditions at any specified location, unaffected by the compressor.
What Is Full-Load?
Air compressor operation at full speed with a fully open inlet and discharge delivering maximum air flow.
Air compressor operation at full speed with a fully open inlet and discharge delivering maximum air flow.
What Is Gas?
One of the three basic phases of matter. While air is a gas, in pneumatics the term gas normally is applied to gases other than air.
One of the three basic phases of matter. While air is a gas, in pneumatics the term gas normally is applied to gases other than air.
What Are Gas bearings?
Load carrying machine elements permitting some degree of motion in which the lubricant is air or some other gas.
Load carrying machine elements permitting some degree of motion in which the lubricant is air or some other gas.
What Is Gauge Pressure?
The pressure determined by most instruments and gauges, usually expressed in psig. Barometric pressure must be considered to obtain true or absolute pressure.
The pressure determined by most instruments and gauges, usually expressed in psig. Barometric pressure must be considered to obtain true or absolute pressure.
What Is Guide vane?
A stationary element that may be adjustable and which directs the flowing medium approaching the inlet of an impeller.
A stationary element that may be adjustable and which directs the flowing medium approaching the inlet of an impeller.
What Is Heat, Adiabatic?
The energy, in foot pounds, required to compress adiabatically to deliver one pound of a given gas from one pressure level to another.
The energy, in foot pounds, required to compress adiabatically to deliver one pound of a given gas from one pressure level to another.
What Is Heat, Polytropic?
The energy, in foot pounds, required to compress polytropically to deliver one pound of a given gas from one pressure level to another.
The energy, in foot pounds, required to compress polytropically to deliver one pound of a given gas from one pressure level to another.
What Is Horsepower, Brake?
Horsepower delivered to the output shaft of a motor or engine, or the horsepower required at the compressor shaft to perform work.
Horsepower delivered to the output shaft of a motor or engine, or the horsepower required at the compressor shaft to perform work.
What Is Horsepower, Indicated?
The horsepower calculated from compressor indicator diagrams. The term applies only to displacement type compressors.
The horsepower calculated from compressor indicator diagrams. The term applies only to displacement type compressors.
What Is Horsepower, Theoretical or Ideal?
The horsepower required to isothermally compress the air or gas delivered by the compressor at specified conditions.
The horsepower required to isothermally compress the air or gas delivered by the compressor at specified conditions.
What Is Humidity, Relative?
The relative humidity of a gas (or air) vapor mixture is the ratio of the partial pressure of the vapor to the vapor saturation pressure at the dry bulb temperature of the mixture.
The relative humidity of a gas (or air) vapor mixture is the ratio of the partial pressure of the vapor to the vapor saturation pressure at the dry bulb temperature of the mixture.
What Is Humidity, Specific?
The weight of water vapor in an air vapor mixture per pound of dry air.
The weight of water vapor in an air vapor mixture per pound of dry air.
What Is Hysteresis?
The time lag in responding to a demand for air from a pressure regulator.
The time lag in responding to a demand for air from a pressure regulator.
What Is An Impeller?
The part of the rotating element of a dynamic compressor which imparts energy to the flowing medium by means of centrifugal force. It consists of a number of blades which rotate with the shaft.
The part of the rotating element of a dynamic compressor which imparts energy to the flowing medium by means of centrifugal force. It consists of a number of blades which rotate with the shaft.
What Is Indicated Power?
Power as calculated from compressor-indicator diagrams.
Power as calculated from compressor-indicator diagrams.
What Is An Indicator card?
A pressure – volume diagram for a compressor or engine cylinder, produced by direct measurement by a device called an indicator.
A pressure – volume diagram for a compressor or engine cylinder, produced by direct measurement by a device called an indicator.
What Is An Inducer?
A curved inlet section of an impeller.
A curved inlet section of an impeller.
What Is Inlet Pressure?
The actual pressure at the inlet flange of the compressor.
The actual pressure at the inlet flange of the compressor.
What Is Intercooling?
The removal of heat from air or gas between compressor stages.
The removal of heat from air or gas between compressor stages.
What Is Intercooling, degree of?
The difference in air or gas temperatures between the inlet of the compressor and the outlet of the intercooler
The difference in air or gas temperatures between the inlet of the compressor and the outlet of the intercooler
What Is Intercooling, perfect?
When the temperature of the air or gas leaving the intercooler is equal to the temperature of the air or gas entering the inlet of the compressor.
When the temperature of the air or gas leaving the intercooler is equal to the temperature of the air or gas entering the inlet of the compressor.
What Is Isentropic compression?
See Compression, Isentropic.
See Compression, Isentropic.
What Is Isothermal compression?
See Compression, Isothermal.
See Compression, Isothermal.
What Is A Leak?
An unintended loss of compressed air to ambient conditions.
An unintended loss of compressed air to ambient conditions.
What Is A Liquid piston compressor?
A compressor in which a vaned rotor revolves in an elliptical stator, with the spaces between the rotor and stator sealed by a ring of liquid rotating with the impeller.
A compressor in which a vaned rotor revolves in an elliptical stator, with the spaces between the rotor and stator sealed by a ring of liquid rotating with the impeller.
What Is Load Factor?
Ratio of average compressor load to the maximum rated compressor load over a given period of time.
Ratio of average compressor load to the maximum rated compressor load over a given period of time.
What Is Load Time?
Time period from when a compressor loads until it unloads.
Time period from when a compressor loads until it unloads.
What Is Load/Unload Control?
Control method that allows the compressor to run at full-load or at no load while the driver remains at a constant speed.
Control method that allows the compressor to run at full-load or at no load while the driver remains at a constant speed.
What Is Modulating Control?
System which adapts to varying demand by throttling the compressor inlet proportionally to the demand
System which adapts to varying demand by throttling the compressor inlet proportionally to the demand
What Is A Multi-casing compressor?
Two or more compressors, each with a separate casing, driven by a single driver, forming a single unit.
Two or more compressors, each with a separate casing, driven by a single driver, forming a single unit.
What Is A Multi-stage axial compressor?
A dynamic compressor having two or more rows of rotating elements operating in series on a single rotor and in a single casing.
A dynamic compressor having two or more rows of rotating elements operating in series on a single rotor and in a single casing.
What Is A Multi-stage centrifugal compressor?
A dynamic compressor having two or more impellers operating in series in a single casing.
A dynamic compressor having two or more impellers operating in series in a single casing.
What Are Multi-stage compressors?
Compressors having two or more stages operating in series.
Compressors having two or more stages operating in series.
What Is Perfect Intercooling?
The condition when the temperature of air leaving the intercooler equals the of air at the compressor intake.
The condition when the temperature of air leaving the intercooler equals the of air at the compressor intake.
What Is Performance curve?
Usually a plot of discharge pressure versus inlet capacity and shaft horsepower versus inlet capacity.
Usually a plot of discharge pressure versus inlet capacity and shaft horsepower versus inlet capacity.
What Is Piston Displacement ?
The volume swept by the piston; for multistage compressors, the piston displacement of the first stage is the overall piston displacement of the entire unit.
The volume swept by the piston; for multistage compressors, the piston displacement of the first stage is the overall piston displacement of the entire unit.
What Are Pneumatic Tools?
Tools that operate by air pressure.
Tools that operate by air pressure.
What Is Polytropic compression?
See Compression, Polytropic.
See Compression, Polytropic.
What Is Polytropic heat?
See Head, Polytropic.
See Head, Polytropic.
What Are Positive displacement compressors?
Compressors in which successive volumes of air or gas are confined within a closed space and the space mechanically reduced, resulting in compression. These may be reciprocating or rotating
Compressors in which successive volumes of air or gas are confined within a closed space and the space mechanically reduced, resulting in compression. These may be reciprocating or rotating
What Is Power, theoretical (polytropic)?
The mechanical power required to compress polytropically and to deliver, through the specified range of pressures, the gas delivered by the compressor.
The mechanical power required to compress polytropically and to deliver, through the specified range of pressures, the gas delivered by the compressor.
What Is Pressure?
Force per unit area, measured in pounds per square inch (psi).
Force per unit area, measured in pounds per square inch (psi).
What Is Pressure, Absolute?
The total pressure measured from absolute zero (i.e. from an absolute vacuum).
The total pressure measured from absolute zero (i.e. from an absolute vacuum).
What Is Pressure, Critical?
See Critical Pressure.
See Critical Pressure.
What Is Pressure Dew Point?
For a given pressure, the temperature at which water will begin to condense out of air.
For a given pressure, the temperature at which water will begin to condense out of air.
What Is Pressure, Discharge?
The pressure at the discharge connection of a compressor. (In the case of compressor packages, this should be at the discharge connection of the package)
The pressure at the discharge connection of a compressor. (In the case of compressor packages, this should be at the discharge connection of the package)
What Is Pressure Drop?
Loss of pressure in a compressed air system or component due to friction or restriction.
Loss of pressure in a compressed air system or component due to friction or restriction.
What Is Pressure, Intake?
The absolute total pressure at the inlet connection of a compressor.
The absolute total pressure at the inlet connection of a compressor.
What Is Pressure Range?
Difference between minimum and maximum pressures for an air compressor. Also called cut in-cut out or load-no load pressure range.
Difference between minimum and maximum pressures for an air compressor. Also called cut in-cut out or load-no load pressure range.
What Is Pressure ratio?
See Compression Ratio.
See Compression Ratio.
What Is Pressure rise?
The difference between discharge pressure and intake pressure.
The difference between discharge pressure and intake pressure.
What Is Pressure, Static?
The pressure measured in a flowing stream in such a manner that the velocity of the stream has no effect on the measurement.
The pressure measured in a flowing stream in such a manner that the velocity of the stream has no effect on the measurement.
What Is Pressure, Total?
The pressure that would be produced by stopping a moving stream of liquid or gas. It is the pressure measured by an impact tube.
The pressure that would be produced by stopping a moving stream of liquid or gas. It is the pressure measured by an impact tube.
What Is Pressure, Velocity?
The total pressure minus the static pressure in an air or gas stream.
The total pressure minus the static pressure in an air or gas stream.
What Is Rated Capacity?
Volume rate of air flow at rated pressure at a specific point.
Volume rate of air flow at rated pressure at a specific point.
What Is Rated Pressure?
The operating pressure at which compressor performance is measured.
The operating pressure at which compressor performance is measured.
What Is Required Capacity?
Cubic feet per minute (cfm) of air required at the inlet to the distribution system.
Cubic feet per minute (cfm) of air required at the inlet to the distribution system.
What Is A Receiver?
A vessel or tank used for storage of gas under pressure. In a large compressed air system there may be primary and secondary receivers.
A vessel or tank used for storage of gas under pressure. In a large compressed air system there may be primary and secondary receivers.
What Is A Reciprocating compressor?
Compressor in which the compressing element is a piston having a reciprocating motion in a cylinder.
Compressor in which the compressing element is a piston having a reciprocating motion in a cylinder.
What Is Relative Humidity?
The ratio of the partial pressure of a vapor to the vapor saturation pressure at the dry bulb temperature of a mixture.
The ratio of the partial pressure of a vapor to the vapor saturation pressure at the dry bulb temperature of a mixture.
What Is Reynold number?
A dimensionless flow parameter (h < D/:), in which h is a significant dimension, often a diameter, < is the fluid velocity, D is the mass density, and : is the dynamic viscosity, all in consistent units.
A dimensionless flow parameter (h < D/:), in which h is a significant dimension, often a diameter, < is the fluid velocity, D is the mass density, and : is the dynamic viscosity, all in consistent units.
What Is A Rotor?
The rotating element of a compressor. In a dynamic compressor, it is composed of the impeller(s) and shaft, and may include shaft sleeves and a thrust balancing device.
The rotating element of a compressor. In a dynamic compressor, it is composed of the impeller(s) and shaft, and may include shaft sleeves and a thrust balancing device.
What Are Seals?
Devices used to separate and minimize leakage between areas of unequal pressure.
Devices used to separate and minimize leakage between areas of unequal pressure.
What Is A Sequence?
The order in which compressors are brought online.
The order in which compressors are brought online.
What Is A Shaft?
The part by which energy is transmitted from the prime mover through the elements mounted on it, to the air or gas being compressed.
The part by which energy is transmitted from the prime mover through the elements mounted on it, to the air or gas being compressed.
What Is A Sole plate?
A pad, usually metallic and embedded in concrete, on which the compressor and driver are mounted.
A pad, usually metallic and embedded in concrete, on which the compressor and driver are mounted.
What Is Specific gravity?
The ratio of the specific weight of air or gas to that of dry air at the same pressure and temperature.
The ratio of the specific weight of air or gas to that of dry air at the same pressure and temperature.
What Is Specific Humidity?
The weight of water vapor in an air-vapor mixture per pound of dry air.
The weight of water vapor in an air-vapor mixture per pound of dry air.
What Is Specific Power?
A measure of air compressor efficiency, usually in the form of bhp/100 acfm.
A measure of air compressor efficiency, usually in the form of bhp/100 acfm.
What Is Specific Weight?
Weight of air or gas per unit volume.
Weight of air or gas per unit volume.
What Is Speed?
The speed of a compressor refers to the number of revolutions per minute (rpm) of the compressor drive shaft or rotor shaft.
The speed of a compressor refers to the number of revolutions per minute (rpm) of the compressor drive shaft or rotor shaft.
What Are Stages?
A series of steps in the compression of air or a gas.
A series of steps in the compression of air or a gas.
What Is Standard Air?
The Compressed Air & Gas Institute and PNEUROP have adopted the definition used in ISO standards. This is air at 14.5 psia (1 bar); 68 F (20 C) and dry (0% relative humidity).
The Compressed Air & Gas Institute and PNEUROP have adopted the definition used in ISO standards. This is air at 14.5 psia (1 bar); 68 F (20 C) and dry (0% relative humidity).
What Is Start/Stop Control?
A system in which air supply is matched to demand by the starting and stopping of the unit.
A system in which air supply is matched to demand by the starting and stopping of the unit.
What Is Supercompressibility?
See Compressibility
See Compressibility
What Is Surge?
A phenomenon in centrifugal compressors where a reduced flow rate results in a flow reversal and unstable operation.
A phenomenon in centrifugal compressors where a reduced flow rate results in a flow reversal and unstable operation.
What Is Surge limit?
The capacity in a dynamic compressor below which operation becomes unstable.
The capacity in a dynamic compressor below which operation becomes unstable.
What Is Temperature, Absolute?
The temperature of air or gas measured from absolute zero. It is the Fahrenheit temperature plus 459.6 and is known as the Rankine temperature. In the metric system, the absolute temperature is the Centigrade temperature plus 273 and is known as the Kelvin temperature.
The temperature of air or gas measured from absolute zero. It is the Fahrenheit temperature plus 459.6 and is known as the Rankine temperature. In the metric system, the absolute temperature is the Centigrade temperature plus 273 and is known as the Kelvin temperature.
What Is Temperature, Critical?
See Critical Temperature.
See Critical Temperature.
What Is Temperature, Discharge?
The total temperature at the discharge connection of the compressor.
The total temperature at the discharge connection of the compressor.
What Is Temperature, Inlet?
The total temperature at the inlet connection of the compressor.
The total temperature at the inlet connection of the compressor.
What Is Temperature Rise Ratio?
The ratio of the computed isentropic temperature rise to the measured total temperature rise during compression. For a perfect gas, this is equal to the ratio of the isentropic enthalpy rise to the actual enthalpy rise.
The ratio of the computed isentropic temperature rise to the measured total temperature rise during compression. For a perfect gas, this is equal to the ratio of the isentropic enthalpy rise to the actual enthalpy rise.
What Is Temperature, Static?
The actual temperature of a moving gas stream. It is the temperature indicated by a thermometer moving in the stream and at the same velocity.
The actual temperature of a moving gas stream. It is the temperature indicated by a thermometer moving in the stream and at the same velocity.
What Is Temperature, Total?
The temperature which would be measured at the stagnation point if a gas stream were stopped, with adiabatic compression from the flow condition to the stagnation pressure.
The temperature which would be measured at the stagnation point if a gas stream were stopped, with adiabatic compression from the flow condition to the stagnation pressure.
What Is Theoretical Power?
The power required to compress a gas isothermally through a specified range of pressures.
The power required to compress a gas isothermally through a specified range of pressures.
What Is Torque?
A torsional moment or couple. This term typically refers to the driving couple of a machine or motor.
A torsional moment or couple. This term typically refers to the driving couple of a machine or motor.
What Is Total Package Input Power?
The total electrical power input to a compressor, including drive motor, belt losses, cooling fan motors, VSD or other controls, etc.
The total electrical power input to a compressor, including drive motor, belt losses, cooling fan motors, VSD or other controls, etc.
What Are Unit type compressors?
Compressors of 30 bhp or less, generally combined with all components required for operation.
Compressors of 30 bhp or less, generally combined with all components required for operation.
What Is Unload?
(No load) Compressor operation in which no air is delivered due to the intake being closed or modified not to allow inlet air to be trapped.
(No load) Compressor operation in which no air is delivered due to the intake being closed or modified not to allow inlet air to be trapped.
What Are Vacuum pumps?
Compressors which operate with an intake pressure below atmospheric pressure and which discharge to atmospheric pressure or slightly higher.
Compressors which operate with an intake pressure below atmospheric pressure and which discharge to atmospheric pressure or slightly higher.
What Are Valves?
Devices with passages for directing flow into alternate paths or to prevent flow.
Devices with passages for directing flow into alternate paths or to prevent flow.
What Is Volute?
A stationary, spiral shaped passage which converts velocity head to pressure in a flowing stream of air or gas.
A stationary, spiral shaped passage which converts velocity head to pressure in a flowing stream of air or gas.
What Is A Water-cooled compressor?
Compressors cooled by water circulated through jackets surrounding cylinders or casings and/or heat exchangers between and after stages.
Compressors cooled by water circulated through jackets surrounding cylinders or casings and/or heat exchangers between and after stages.
List compiled by compressed Air & Gas Institute.